Hydroponics |Grow Lights|Plant Nutrients » Self Calibration http://www.igrowhydro.com/blog We cover Hydroponics, Grow Lights and Plant Nutrients Tue, 02 Aug 2011 12:01:23 +0000 en hourly 1 http://wordpress.org/?v= Sentinel CHHC-1 Total Climate Controller http://www.igrowhydro.com/blog/711/sentinel-chhc-1-coupon/ http://www.igrowhydro.com/blog/711/sentinel-chhc-1-coupon/#comments Mon, 03 Aug 2009 15:50:23 +0000 i grow hydro http://www.igrowhydro.com/blog/?p=711 Sentinel CHHC-1 Total Climate Controller PictureThe Sentinel CHHC-1 total climate controller handles ALL of your growing area conditions accurately & reliably. First the CHHC-1 has all of the CO2 control features of the Sentinel CPPM-1. This All in one climate controller also has the ability to control 3 other devices: a cooling device, a heating device and humidity device. As with all of Sentinel’s climate controls, the CHHC-1 controller is simple to use. You can set separate day and night temperature settings as well as humidity settings. This climate controller even records the Min and Max temperature, humidity and CO2 levels. Unlike some CO2 controllers, the Sentinel CHHC-1 is able to be calibrated by the user with our “self calibration feature.”

Sentinel CHHC-1 Advantages

  • Monitors and controls CO2 with PPM accuracy
  • Also controls 3 other devices, a heating device. a cooling device and a humidity device.
  • Separate day/night temp and humidity settings.
  • Records the min and maxi temp, humidity and CO2 levels.
  • Has 2 separate outputs to control cooling and heating.
  • Can increase or decrease the amount of humidity in the growing area.
  • Remote temp, humidity, CO2 and light level sensor

Climate Controller Overview

Sentinel CHHC-1 Info graphic

There are 3 environmental conditions which must be controlled for productive indoor growing. Independent settings on the CHHC-1 make it easy to accurately control your “atmosphere” inside the area.

Temperature is up first. The CHHC-1 has 2 separate outputs to control cooling and heating. Next is humidity and the CHHC-1 can either increase or decrease the amount of humidity inside the area. The third is  CO2 PPM. This climate controller controls carbon dioxide with Part-Per-Million accuracy.  This climate controller also features a remote combination Temperature, Humidity, CO2 & Light level sensor module that can be located inside the growing area. For indoor growing, Cooling devices such as ventilation fans or air-conditioners connect to the Cooling Device receptacle and heaters for cooler climate greenhouses can be connected to the Heat Device receptacle. Connect your 120 volt compressed CO2 solenoid / regulator assembly to the CO2 receptacle. Dehumidifier or a humidifier can be connected to the Humidity Device receptacle.

Sentinel CHHC-1 Documents

CHHC-1 Instructions
CHHC-1 Info Sheet

CHHC-1 Climate Controller Specs

3 year manufacturer warranty.

Amps / Volts Requirements: 15 amps @ 120 volts
Remote Sensor Cable Length: 16 ft (can be up to 100 ft)
Min / Max Operating Temperature: 32 to 120 degrees F
Min /Max Operating Humidity: 0 to 99% RH
Temperature Measurement Range: 32 to 122 degrees F
Humidity Accuracy: +/- 3% RH
Light Sensor Sensitivity: Adjustable
CO2 Measurement Range: 0 to 2500 PPM
CO2 Accuracy: +/- 75 PPM
CO2 Sensor Warm-Up Time: Less than 10 minutes
Computer Interface (Optional): RS 232 – 9-pin D-sub
Weight: 5 lbs.Dimensions: 8″ x 6.5″ x 3.1″
Life Expectancy: >10 years
Comes with 15 foot cable

Sentinel CHHC-1 All in One Total Control link

No related posts.

]]> http://www.igrowhydro.com/blog/711/sentinel-chhc-1-coupon/feed/ 1