Serious growers who want a larger system should check out the EuroGrower. The EuroGrower provides users with a simple, yet elegant approach to home hydroponics. The heart of the EuroGrower is its custom designed 40-gallon Panda reservoir, which is more than adequate for its eight 2-gallon buckets. Whether using a soil or soil-less medium, growers can use the EuroGrower virtually anywhere.

The EuroGrower by General Hydroponics utilizes modern European technology in a simple easy to use home system. The EuroGrower comes with 8 individual 2 gallon pots that fit together on top of the 10-gallon Panda reservoir. The EuroGrower 8-Pot Drip Watering Hydroponics System provides nutrients through a drip system. You can grow virtually anywhere using the EuroGrower with any popular soil or soilless medium. The EuroGrower comes complete with the industry standard, GH Flora Series nutrients and is built to be “ready-to-grow” and comes with all the hardware you will need. You can grow either numerous small plants or one large one in each of its 2 gallon capacity buckets. Use the media of your choice. Suitable for greenhouse, patio or indoors under artificial lighting.

Measurements:

2′-2″W x 4′-2″L x 2′H

The EuroGrower (Complete) System Includes:

• 40-Gallon Panda reservoir
• 8- 2 Gallon Buckets
• 250gph Mag-Drive 2
• 4 – CocoTek bricks
• Hydroton
• pH Kit
• Grasslin Timer
• 3-part Flora Kit (GH Flora Series nutrients: Flora Micro, Flora Gro & Flora Bloom)

No related posts.

The Ecoplus Pump 230 is a powerful water pump that can move massive amounts of water. External pumps are good for systems that require a lot of power. Capable of moving water to five feet in elevation at a rate of 11 gallons per minute with a discharge pressure of 35 PSI, the Ecoplus 230 is ideally suited for use with water fountains, ponds and waterfalls. These powerful submersible units are also perfectly suited for hydroponic systems.

There are three types of hydroponic water pumps; submersible, non-submersible, and a cross between the two (“semi-submersible”). A submersible pump site and pumps water completely submerged in the nutrient solution. A non-submersible pump is an external water pump that is outside of the nutient solution. A semi-submersible pump sits in the solution to pump, but the top of the pump must remain dry. The Ecoplus 230 water pump is the first type of water pump; a fully submersible pump.

A hydroponic pump continually provides plants with water and mineral solutions.
The nutrients provided allow for the necessary process of photosynthesis to be performed. A system’s regular operation provides a plant with a controlled and regular environment in which it may flourish.

Sometimes, a hydroponic pump may bring solution to the top of a sloping tray to flow down over a plants roots. At other times, it may carry the essential liquids to an overhead spray. An ebb and flow system utilizes a pump to flood a medium with water and nutrients.

In addition to its maximum pressure of 116 psi, it also has a suction lift capacity of 25 feet.  The Ecoplus pump 230 is a high-volume, self priming multi-stage pump composed of of non-corrosive and rust-proof material with a double-insulated impeller and built-in thermal protection, the Ecoplus is designed to keep waterfalls flowing for years. Optional suction kit, space saver filter housing and sediment filter also available.

Technical Specifications

1. Power Supply – AC 115V, 60Hz
2. Power Consumption – 800w
3. Maximum Suction Lift – 25ft (7.6M)
4. Maximum Pressure Capacity – 116 PSI
5. Output – 1/2 HP

No related posts.

No related posts.

Each EZ-Clone unit has a maximum amount of spray heads put into its custom irrigation system to thoroughly cover your root zone. EZ-Clone cloning systems combine a custom molded reservoir, leak resistant lid and mist manifold with a dependable Danner mag drive water pump to deliver a fine hydroponic mist to your plant cuttings. The plant cups and reusable neoprene inserts keep your plant clones securely in place. An air pump and air stones are included for increased external oxygenation! The makers of EZ-Clones have thought of everything, including a drain valve with a  shut-off that will hook up to a standard garden hose. You will not be disappointed with the EZ-Clone machine!

With the EZ-Clone, you should achieve 100% success with your propagation cuttings in about five days.

The EZ-Clones come in three different dimensions:

EZ-Clone 30: 22-1/2″x17″x15″/12 gallon reservoir/Water capacity = 6 gallons.

EZ-Clone 60: 32-1/2″x19-1/2″x15″/16 gallon reservoir/Water capacity = 8 gallons.

EZ-Clone 120: 43-1/2″x24″x15″/22 gallon reservoir/ Water capacity = 11 gallons.

Standard features for the EZ-Clones include:

• Custom neoprene collars
• High flow-rate irrigation system
• Leak resistant lid.
• Deep lid base for easy access.

No related posts.

What is reverse osmosis?

HydroLogic Reverse osmosis works by using pressure to force a solution through a membrane (in this case water), retaining the solute on one side (contaminants) and allowing the pure solvent to pass on the other side (water). This is the reverse of the normal osmosis process, which is the natural movement of solvent from and area of low solute concentration, through a membrane, to an area of high solute concentration when no external pressure is applied. Now don’t you feel smarter?!

Plants can only absorb so many nutrients (whether good or bad). By removing the bad nutrients, and lowering the parts per million (PPM) of your water, you are now able to add beneficial nutrients to your plants that can be absorbed by your plants. Tap water passes through a  series of filters and membranes to reduce up to 98% of impurities – as small as 1,000th the width of a human hair – such as arsenic, lead, radium, 95%+ of chlorine, hardness (calcium and magnesium), excessive minerals (iron), and all other contaminants.

The Merlin Garden Pro also wastes approximately 40% less drain water than other RO systems on the market. Merlin’s four-stage design uses a carbon pre-filter, two RO membrane elements, and a carbon post filter to produce the highest quality water.  By purifying your water, and adding beneficial nutrients, you are enabling your crop to grow bigger, flower more, and get the most out of the good nutrients you add!

The Merlin Garden Pro RO System features continuous-flow water production, so a storage tank is no longer required. The unit operates on line pressure, which eliminates the need for an electrical pump in most application. The patented high production, low-energy membrane reduces impurities in up to roughly 30 gallons of water per hour, or  750 gallons (2,816 liters) of water per day!

Maximize your nutrients uptake and your crops by using a Merlin Garden Pro High-Flow Reverse Osmosis System!

No related posts.

General Hydroponics WaterFarm Plumbing Kit Includes:

• Pumping column (2-piece white tube with air inlet at bottom)
• Pumping column support tube (white PVC tube with bevel facing down)
• Drain Level Tube (translucent blue tube fitted to black elbow)
• DLT clip
• 1/2 inch grommet
• Air Line (clear tubing)
• Drip ring assembly

General Hydroponics WaterFarm

The compact WaterFarm is made by General Hydroponics and measures a mere 10″x10″x15″ tall, with a reservoir capacity of 2.5 gallons. The unique square design allows you to connect several WaterFarms together in close proximity, indoors or out. Any sized plant may be grown in the WaterFarm, but it is particularly suited to accommodate larger plants like tomatoes, cucumbers and peppers. The WaterFarm comes complete with outer reservoir, inner growing chamber, pump, reusable grow rocks and hydroponic nutrient.

General Hydroponics WaterFarm Manual

Click to download a PDF of  the General Hydroponics WaterFarm Manual

igrowhydro.com packages the General Hydroponics WaterFarm two ways: the complete WaterFarm package and the barebones WaterFarm. Here is a quick breakdown of the two systems.

The complete WaterFarm system includes

• 4-gallon reservoir
• 2-gallon growing chamber
• Pumping column
• Column support tube
• Drip ring
• 1/2″ grommet
• Drain level tube
• Elite® 800 air pump
• 9L Hydroton
• 3-part Flora Kit

The barebones WaterFarm package includes

The barebones WaterFarm is a modular unit that comes without a Drain Level Tube, Elite air pump, Hydroton, or Flora kit, as it is designed to use with a General Hydroponics controller supplying multiple WaterFarm units. To use the barebones WaterFarm package, you should check out the entire line of General Hydroponics WaterFarm hydroponic equipment.

No related posts.

The GI Grow rotating garden system is suitable for various plant populations. For very large plants, you can insert a cube in the tray every 8″ to 12″ in the slab.  The ”CUBE LOCK” system allows an easy rock wool cube insertion wherever in the slab and at the same time keeping very tight those precious cubes. For example: The 144-plant rotating machine can accommodate 48, 72, 96, 120 or 144 plants by cutting the water supply to any unused areas. Follow this link to see our complete catalog of rotating garden equipment.

The main benefits of GI GROW hydroponic rotating gardens are:

• The garden works on the drip principle from the wool base of the cube.
• The advantage of GI GROW is that you never need to adjust the pH and the level of ppm in the covered basin because the liquid circulates only once. It never gets exposed to light, so algae does not develop in the basin.
• Better use of CO2 because the garden is partially closed.
• Made of the same high-quality stainless steel as kitchen implements, this very solid garden can accommodate from 48 to 336 cultivated plants in the 4″ rock wool in the cube.
• It is very easy to use and its output is beyond compare due to the high oxygenation in the cubes because there is no over watering.
• The use of 4″ rock wool cubes gives you several hours of flexibility in case of an electricity outage.

ADJUSTABLE SYSTEM: You can adjust the size of the GI Grow system’s hoop to suit the size of your plants using the same frame.

IT’S A 2-IN-1 SOLUTION!

• Option 1: Limited space (small hoop) Plants 17″ and under
• Option 2 : Spacious (large hoop) Plants between 12″ and 24″

These rotating hydroponic gardens inject the exact required amount of liquid fertilizer in each cube.

• Major savings on fertilizer compared to other rotating hydroponic gardens or hydroponics systems.
• No longer drain large quantities of used fertilizer each week (big savings)
• No more saturated cubes that drown your plants.
• Less humidity in your growing area = fewer diseases = fewer insect pests (for example, fruit flies)Because each tray is its own separate garden, this prevents the spread of disease.
• The trays are made of ultra solid and sturdy stainless steel. Unlike plastic ones, these trays do not break and they do not release contaminants.
• It is possible to upgrade from 144 to 240 or to 336 plants by purchasing an extra set of trays and accessories while using the same frame.
• Due to the programmable clock, you will no longer slow the growth of your small plants by over watering them.

Rotating Garden Features:

• 3 size of slabs – 144, 240, 336.
• The tool to install anddispose the slabs.
• ”CUBE LOCK” system.
• Made of high-quality stainless steel.
• The trays are made of ultra solid and sturdy stainless steel.
• Programmable clock

Hydroponic Rotating Garden Specs:

• Can accommodate from 48 to 336 cultivated plants in the 4″ rock wool in the cube.
• The 144-plant rotating machine can accommodate 48, 72, 96, 120 or 144 plants by cutting the water supply to any unused areas.
• You can superpose your hydroponic rotating gardens on metal shelves simply by combining one machine with the small ring for seedlings, and by adding two or three other machines with the big ring for bigger plants that measure up to 24″.
• All you have to do is transfer the trays containing plants into the big ring when more space is needed.

No related posts.