Quantum Digital Ballast Series: What you need to know
The Quantum Ballast is one of the most reliable and versatile digital ballasts on the market. For example, the quantum digital ballast series can be switched from 120v to 240v by simply changing power cords(included). Another great feature of the Quantum Ballast is the three phase dimming switch. This three phase dimming switch allows you to run your lamp at 100%, 75%, and 50% power. Basically, your 1000w ballast becomes a 750w or 500w without having to switch the bulb, allowing you to change the intensity depending on what stage your plants are in. The Quantum Ballast is air-cooled and runs 15% cooler than other digital ballasts on the market.The Quantum Series ballast is covered by a full three year warranty under normal use.
Grow Tip
The dimming aspect of Quantum digital ballast can help with energy conservation and controlling temperature. When outside temperatures spike, the Quantum Ballast can be dimmed down thereby lowering the temperature around your plants.
Instructions for Quantum Series Lighting
- Quantum ballasts complies with Part 18 of the FCC rules and regulations.
- Quantum’s can take Metal Halide and High Pressure Sodium lamps without having to flip switches or change wiring.
- Savings of up to 30% have been reported from our laboratory testing facilities compared to standard core and coil ballasts.
- As with any electrical device, make sure that your ballast’s incoming power cords and outgoing lamp cords are never exposed directly to water.
- Always keep your cords neat and tidy to eliminate any possibility of accidentally tripping over them or catching them on protruding objects.
The dimming switch is located on the front of your ballast just above the lamp cord. Always allow 30 seconds between the different output settings to allow your ballast to draw the proper amount of power and charge your bulb to the desired setting. Do not rapidly toggle the control back and forth as this may cause damage to your ballast and/or bulb.
If the ballast should go off for any reason, always allow the bulb to cool before re-striking it again. This allows the gases inside the bulb to cool and reignite.
In the case that a power surge blows the fuse in your ballast, an extra fuse is included and is stored behind a small tab located underneath the power cord inlet. Be gentle when you open the tab as to not damage it. Make sure the ballast is unplugged before replacing or inspecting the fuse. Our engineers have also programmed the ballast with an automatic time delay in case of power outage. This was built in for the safety of you, your garden, and your equipment. If a shut down should occur, the lamp will strike by the time the bulb has cooled. Do not turn the ballast on and off in a rapid manner this may cause damage to your ballast and/or bulb.
To recap, the Quantum Digital Ballast Series is highly recommended by igrowhydro.com and here’s why:
- Run at 100%, 75% or 50% power
- Strike both Metal Halide and High Pressure Sodium Bulbs
- Accepts 120v or 240v (Both cords included)
- Allows 50 Hertz to 60 Hertz
- Runs 15% cooler than other digital ballasts on the market
- Has a Power Factor of 99.9%
- The most stable output frequency of any ballast
- Higher lumen output than magnetic ballasts
- Light weight and care free
- Works on most gen-set units
- The Quantum Series ballast is covered by a full three year warranty under normal use
Click here to shop for Quantum Digital Ballasts. igrowhydro carries Quantum ballasts with the following reflectors.
Adjust-A-Wing 1000 Watt, Adjust-A-Wing 600 Watt, Radiant AC 1000 Watt, Radiant AC 600 Watt, Super Sun 1000 Watt, Super Sun 600 Watt, Xtrasun 1000 Watt, Xtrasun 600 Watt, Liquid Lumens 600 W
Similar Posts:
- The Lumatek electornic ballast is a leader in the market.
- Digital Balasts: Lumatek grow lights of the future
- Adjust A Wing reflector for grow lights
- Configuring your high pressure sodium lighting kit
- Fresh Tips (Grow Lights #5 – Digital Lighting)
Popularity: 100% [?]
(5 votes, average: 4.40 out of 5) 
Loading ...You can listen to this post too!
Comment by Elijah on 11 July 2009:
Love LOVE LOVE my Quantum Digital Ballasts. Dimmer switch is a nice feature. Runs cool, no problems, easy to use. Awesome shade of orange. I\’m replacing all of my ballasts with these.
Comment by Steve on 14 July 2009:
Since switching to Quantum Ballasts with the dimming switch, I am now able to control my room temperature on hot days and never have to raise or lower my lights! I also love the 120/ 240 volt option!