Gen-1 is capable of producing roughly 13 cubic feet of CO2 per hour. It comes standard with four burners.

Gen-2: The Gen-2 is capable of producing roughly 26 cubic feet of CO2 per hour. It comes standard with 8 burners.

These Generators have been designed with safety in mind. There are several important safety features:

• Electronic Spark Ignition: (electronic ignition models ONLY)Eliminates the standing pilot lights and risk involved with a constand standing flame and possible gas leakage if a pilot goes out.
• Tip-Over Shut-Off Switch: Shuts unit off in event of tipping over or falling. If the unit is tilted more than 35 degrees in any direction, the main valve is turned off preventing fuel flow.
• AGA Approved devices - either low pressure, in-line natural gas regulator OR no-tools-required liquid propane to make tank replacement easy.

Other Features:

• Powder-coated steel enclosure
• All key devices loacated on right side of unit
• LP/NG conversion - easy to convert from LP to Natural gas operation or vice versa with use of coversion kit & replacing the burners.Each burner produces approximately 3 cubic feet of CO2 per hour.

All C.A.P. CO2 Generators are warranted against defects in workmanship and parts for Three Years.

GEN-1E Specs
The GEN-1e can produce between 3-13 cubic feet of CO2 per hour. It is recommended for areas under 3200 cubic feet.

Power Supply In: 120 volts
Power Supply Out: 24 volts AC
Propane Pressure: 11" WC
Natural Gas Pressure: 4.5" WC
Total BTU 1 Burner: Propane 2,794 / Natural Gas 3,135
Total BTU 2 Burners: Propane 5,588 / Natural Gas 6,270
Total BTU 3 Burners: Propane 8,382 / Natural Gas 9,405
Total BTU 4 Burners: Propane 11,178 / Natural Gas 12,540
Weight: 12 lbs
Dimensions: 11" x 161/2" x 81/2"